iSANMATE PETG Carbon Fibre filament 1.75mm 1kg roll

iSANMATE PETG Carbon Fiber Filament is extremely high quality, carbon fibre Infused 3D printing filament that delivers superior quality than the competition.

Composed of chopped carbon fibre and PETG, this filament is ideal for printing structural parts due to its high rigidity and hardness.

The carbon fibres also comes with some bonus features including a premium surface quality, dimensional stability, and ease of printing.

• Heat Resistant
• Excellent Chemical Resistance
• Low warpage and shrinkage, does not require heated chamber
• +/-0.03mm tolerance diameter
• Neat windings 

Printing Guidelines

• Print Hot-end temperature: 240~260c
• Print Bed temperature: 60~80c
• Print Speed: 50~100mm/s
• Nozzle: > 0.5mm to avoid clog

Tips

• Nozzles with larger diameters (0.5mm or more) are much less prone to clogging, as the fibres can pass through the nozzle tip easily.  If clogging occurs after printing the first layer or two, try increasing the first layer height.  A nozzle positioned too close to the bed can create increased back-pressure during these initial layers, causing fibres to accumulate and temporarily clog the nozzle.