CarbonX™ Carbon Fiber Reinforced Polycarbonate (PC) Filament
CarbonX™ Carbon Fiber Reinforced Polycarbonate (PC) Filament
Click to open expanded view

CarbonX™ Carbon Fiber Reinforced Polycarbonate (PC) Filament

1 review
Price
$152.00
Tax included. Shipping calculated at checkout.

Size: 1.75mm 750g Black

CarbonX™ Carbon Fiber Reinforced Polycarbonate (PC) Filament

SKU
Size
Price
CarbonX™ Carbon Fiber Reinforced Polycarbonate (PC) Filament
PC003CF200750BK00 1.75mm 750g Black
$152.00
Sold out
Compare product options
SKU: PC003CF200750BK00
Out of stock
CarbonX™ Carbon Fiber Reinforced Polycarbonate (PC) Filament
Size: 1.75mm 750g Black

Stock Notification

Get notified when this product is available again

Share this product

Share E-mail
Technical data Sheets

GRADE PRINTING DIFFICULTY LEVEL*
3DXSTAT™ ESD PEKK EXPERT
3DXSTAT™ ESD Ultem 9085 EXPERT
3DXSTAT™ ESD Ultem 1010 EXPERT
3DXSTAT™ ESD PPS ADVANCED
3DXSTAT™ ESD PVDF ADVANCED
3DXSTAT™ ESD PC ADVANCED
3DXSTAT™ ESD PETG NOVICE
3DXSTAT™ ESD ABS INTERMEDIATE
3DXSTAT™ ESD PLA NOVICE
CarbonX™ Carbon Fiber PEKK EXPERT
CarbonX™ Carbon Fiber PEKK-A [AERO] EXPERT
CarbonX™ Carbon Fiber PEEK10 EXPERT
CarbonX™ Carbon Fiber PEEK20 EXPERT
CarbonX™ Carbon Fiber PEI 1010 EXPERT
CarbonX™ Carbon Fiber PEI 9085 EXPERT
CarbonX™ Carbon Fiber PC ADVANCED
CarbonX™ Carbon Fiber ezPC INTERMEDIATE
CarbonX™ Carbon Fiber PP ADVANCED
CarbonX™ Carbon Fiber PA6 Gen3 INTERMEDIATE
CarbonX™ Carbon Fiber PC-ABS INTERMEDIATE
CarbonX™ Carbon Fiber HT NYLON INTERMEDIATE
CarbonX™ Carbon Fiber PA12 Nylon INTERMEDIATE
Obsidian™ PA6+CF [Markforged ONYX Alternative] INTERMEDIATE
CarbonX™ Carbon Fiber PETG NOVICE
CarbonX™ Carbon Fiber ASA INTERMEDIATE
CarbonX™ Carbon Fiber ABS INTERMEDIATE
CarbonX™ Carbon Fiber PLA NOVICE
THERMAX™ PEKK-C EXPERT
THERMAX™ PEKK-A EXPERT
THERMAX™ PEEK EXPERT
THERMAX™ TPI [EXTEM]  EXPERT
THERMAX™ PEI [1010] EXPERT
THERMAX™ PEI [9085] EXPERT
THERMAX™ PPSU EXPERT
THERMAX™ PSU EXPERT
THERMAX™ PPS ADVANCED
THERMAX™ PPE-PS ADVANCED
SimuBone™ Bone Modeling Filament INTERMEDIATE
FluorX™ PVDF ADVANCED
Evolv3D™ OBC ADVANCED
HyperLite™ PP ADVANCED
3DXSTAT™ ESD-Flex TPU (90A) ADVANCED
3DXMAX® PC ADVANCED
ezPC™ INTERMEDIATE
3DXMAX® PC/ASA INTERMEDIATE
3DXMAX® PC/ABS INTERMEDIATE
3DXPro™ Low Gloss PETG INTERMEDIATE
MAX-G™ PETG NOVICE
ECOMAX® PLA NOVICE
ECOMAX® Tough PLA NOVICE
3DXMAX® ASA INTERMEDIATE
Firewire® Flame Retardant ABS INTERMEDIATE
Firewire® Flame Retardant PC-ABS INTERMEDIATE
3DXMAX® ABS Filament INTERMEDIATE
3DXMAX® HIPS Filament NOVICE
 FibreX™ PEEK-GF20 EXPERT
 FibreX™ PEI-GF30 EXPERT
 FibreX™ PA6-GF30 Nylon INTERMEDIATE
 FibreX™ PA12-GF30 Nylon INTERMEDIATE
 FibreX™ ABS-GF INTERMEDIATE
 FibreX™ PP+GF30 INTERMEDIATE
AmideX™ Nylon 6-66 INTERMEDIATE

WearX™ Wear Resistant PA6

 INTERMEDIATE
 AquaTek™ X1 USM Water Soluble Support N/A
THERMAX™ HTS High Temp Support N/A
3DXSTAT ESD-Nylon 12 N/A
THERMAX™ MTS Medium Temp Support N/A

Recommended Printing Experience

Novice:  A beginner using an entry-level 3D printer should have minimal problems using this material
Intermediate:  User has several months of experience with a moderate to high quality printer
Advanced:  User has > 1 year of printing experience and is using a high quality commercial printer
Expert:  User has significant amount of experience and is using a high-performance or heavily modified printer

Product Description

CarbonX™ Carbon Fiber Reinforced Polycarbonate (PC) Filament

CarbonX™ CF-PC is a high-performance carbon fiber reinforced PC filament.  This filament is ideal for anyone that desires a structural component with high heat, high stiffness, excellent surface quality, and dimensional stability.  Polycarbonate has a Tg of 147°C and offers some of the highest thermal performance on the 3D market.  

Recommended Print Conditions:

  • Extruder:  280-310°C
  • Bed Temp:  110-120°C
  • Bed Prep:  PEI Sheet or tape, Kapton/PI Tape, Glue stick on clean glass, ABS/Acetone Slurry
  • Nozzle: We strongly recommend a 0.4mm orifice or larger using one of our Hardened Nozzles
  • Layer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.
  • Support:  Our Aquatek or PVA water soluble support works great to create complex parts.  This support can be found.
  • Drying Instructions:  Please see the following instructions for when you want to dry out this filament.