Welcome to the home of high performance filaments 3DXTech in New Zealand
PLA to PEKK, we have the broadest portfolio of carbon fiber reinforced materials in New Zealand and all in stock here local.
PLA to PEKK, we have the broadest portfolio of carbon fiber reinforced materials in New Zealand and all in stock here local.
The Copperhead™ is a low-cost, open-source hotend option that can handle the heat — heat creep, that is.
Replace your factory model hotend with the Copperhead™, to upgrade your 3D printer’s performance and reduce jamming, giving you a smooth print every time.
The Copperhead can be installed on just about any printer, there are many adapter plates and connections that are printable or made from cnc, most are found here:
https://www.sliceengineering.com/pages/adapters
Unlike most materials, plastics don’t have a clean transition from solid to liquid during melting. As filament moves through the hotend, it heats up and reaches the material’s glass transition temperature (Tg), entering a semi-solid, semi-liquid, “gooey” state. While in this state, the plastic responds to applied forces like a wet noodle, causing undesirable print effects like reduction in resolution, blobbing and jamming. An efficient heat break narrows the physical distance during which the plastic is at it’s Tg, and thus improves 3D printer performance. The Bimetallic Heat Break™ from Slice Engineering® is the only heat break designed through the use of thermal imaging to optimize heat transfer.
Primary benefits:
Select the parts that suit your printer from the selections below.
Needed to buy:
Thermal paste for improving conduction Acts as a release agent Unlike anti-seize compounds, Boron Nitride is not electrically conductive, whi...
View full detailsPump more power into your 3D printer with a high power density 50W heater cartridge. Available in 24V and 12V variations with different connector...
View full detailsEliminates the need for high temperature RTD's or having two separate thermistors to maintain accuracy at both the low and high end of the temper...
View full detailsGot a sticky nozzle? Sick of plastic sticking to it all the time? Plastic Repellent Paint™ by Slice Engineering® is the solution for you! Plastic ...
View full detailsHigh quality 25 mm box fan with dual Japanese bearings 3.64 CFM Genuine Molex Micro-Fit 3.0 connector Mounts directly to the standard Mosqu...
View full detailsProduct on pre purchase at this stage to keep up with dammands, secure your Mosquito as they sell fast. Superior heat break performance - conduct...
View full detailsCopperhead™ Hot Block Nickel-plated for superior longevity and reduced emissivity Copper alloy base material Distinctive laser marking Convenient ...
View full details500deg rated PT1000 slice engineering temp sensor These are to replace the stock 450deg thermistor Pt1000 Resistance Temperature Detector (RTD) u...
View full detailsReplace your factory model hotend with the Copperhead™, to upgrade your 3D printer’s performance and reduce jamming, giving you a smooth print ever...
View full detailsMORE THAN A HOTEND, A NEW MODALITY Mosquito® Magnum+™ Includes all of the industry-leading benefits of the Mosquito® product line, such as Bimetall...
View full detailsMounts directly to the top of The Mosquito Hotend™/Mosquito Magnum™ heat sink Simple to install and configure Machined aluminum component Inc...
View full detailsCopperhead™ Heat Sink Aircraft-grade aluminum heat sink Fits the Standard Copperhead™ Heat Break Two variants available SEMI™ mount Groovemount F...
View full detailsCopperhead™ Heat Breaks Bimetallic Heat Break™ Rated to 450 °C Covers the gamut of printable thermoplastics Eliminates Heat Creep Copperhead™ Hea...
View full detailsCompatible with all Slice nozzles. E3D and Bondtech nozzles and can be tightened with an adapter and socket. Specifically designed for changing no...
View full detailsLiquid Mosquito 6mmOD cooling connections NOTE: These are 5-6 days delivery from the US if ordered with the Liquid Mosquito hotend complete. High-q...
View full detailsLiquid Mosquito NOTE: These are 5-6 days delivery from the US directly at this stage as production is released. Behold the Mosquito™ Liquid - it ...
View full detailsAircraft grade aluminum heat sink Fits Mosquito™ or Mosquito™ Magnum Mounting point for 25 mm cooling fan Contains built in anti-rotation f...
View full detailsLiquid Mosquito block NOTE: These are 5-6 days delivery from the US directly at this stage as production is released. Fits the standard mosquito o...
View full details1 m long extension cable Molex Micro-Fit 3.0 connector (female end) JST RE-02 connector (male end)
Need to replace your heat break? We’ve got you covered, with the Bimetallic Heat Break™ from Slice Engineering. Composite, bi-metallic constructio...
View full detailsHardware for mounting the hot block to the heat sink in the Mosquito or Mosquito Magnum hotends. Thin walled stand-off tubes reduce conductive he...
View full detailsThe Mosquito™ Magnum prints upwards of 40 mm^3/sec A thermal insulator protects the extended melt zone from the effects of active cooling and...
View full detailsMounting hardware for all Slice Engineering® hotend variants. Includes: Set (2x) of M2.5x10 socket head cap screws and washers for attaching Mosq...
View full detailsReplacement heat break insulator for the Mosquito Magnum™ hotend Composite construction Insulates Mosquito Magnum™ heat break to help extend ...
View full detailsReplacement hot block for the standard Mosquito™ and Mosquito Magnum™ hotend variants High-grade copper construction Plastic-repellent coatin...
View full detailsMounts directly to the top of the Mosquito™/Mosquito Magnum™ hotend heat sink Simple to install and configure Machined steel components Inc...
View full detailsVanadium-alloyed high speed steel for superior abrasion resistance at printing temperatures Hardened and tempered to 64 Rockwell C Wear-resistant,...
View full details{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}