ezPC™ Polycarbonate 3D Printer Filament

We absolutely love printing ezPC™! This polymer was developed specifically for 3D printing functional prototypes and end-use parts. It was formulated to allow for ease of printing coupled with exceptional mechanical and thermal properties.

ezPC™ Polycarbonate is an excellent choice for printing parts that would ordinarily fail when using standard materials such as PLA, PETG, or ABS. We consider this an excellent bridge in performance between these lower performance materials and higher priced materials such as Ultem or PEEK.

Technical Data Sheet:  ezPC™ Polycarbonate 3D Printing Filament

Benefits of ezPC Include:

• Low warp, high heat resistance, and excellent mechanical properties
• Ease of use on a wide array of printers, no heated chamber needed!
• High thermal properties with a Tg of 118°C and HDT of 112°C
• Superior thermal properties vs. PLA, PETG, ABS, and ASA
• No odors or hazardous fumes while printing making it ideal for a home or office environment
• Perfect for functional end-use parts as well as prototypes
• Excellent adhesion to our AquaTek™

Filament Specifications:

1.75mm and 2.85mm +/- 0.05mm in diameter

Recommended Print Settings:

• Extruder: 255-275°C
• Bed Temp: 90-110°C
• Fan Speed: No fan
• Bed Prep: Magigoo Bed Prep Adhesive gives best results
• Heated Chamber: Not required
• Print Speed: 40-60mm/s
• Supports: Water soluble AquaTek™ X1 USM works great for complex parts.
• Drying Instructions: 80°C for 4+ hours.

Please note that this material absorbs moisture after opening from the package and may need to be dried for optimal printing. If drying is necessary, please dry at 80°C for a minimum of 4 hours.