Super Lube Multi-Use Synthetic Oil with Syncolon® Oiler (Blister Pack) 7ml

Super Lube® Synthetic Oil with PTFE – Needle-Point Oiler

The 3D printer lubricant that gets exactly where it needs to go.

Dry rods, squeaky lead screws and sticky bearings are the quiet killers of print quality. Super Lube’s needle-point oiler fixes that with a precision tip that puts a single drop right on the rail, rod or bearing – no mess, no over-oiling, and no fishing around with a rag trying to get into the tight spots behind your carriage.

Why it’s the go-to for 3D printing

• Synthetic oil with PTFE – a long-lasting, low-friction film that keeps linear rods and lead screws gliding smoothly between services
• Needle-point applicator – pinpoint control for bearings, rods, Z-screws and idler pulleys without dripping onto belts or your print bed
• Won’t gum up or dry out – stays slick where petroleum oils thicken and attract dust and filament fluff
• Safe on plastics, rubber and metals – fine around printed parts, PETG brackets and POM wheels
• Wide temperature range – stable in a hot enclosure and in a cold garage
• Food-grade rated (NSF H1) – non-toxic and odourless, so it’s happy in a home office or classroom
• The brand the big printer manufacturers trust – Super Lube is the lubricant you’ll find recommended in the maintenance guides from leading 3D printer makers

Where to use it

Linear rods and rails, lead screws, bearings, Z-axis screws, extruder gears and idlers, hinge and door pivots on enclosed printers – anything that moves and shouldn’t squeak.

How to use it

Wipe the rod or rail clean with a lint-free cloth, apply a drop or two along the length, then run the axis back and forth a few times to spread it. A little goes a long way – one oiler will see most hobby printers through years of maintenance.

Keep your printer running quiet, smooth and accurate. Grab one with your next filament order.