Magigoo – The 3D printing adhesive for ABS, PLA, PETG, HIPS, and ASA

DISCONTINUED PRODUCT

The new Magigoo Supergrip now replaces this product.

Link here: https://www.formtech.co.nz/products/magigoo-the-3d-printing-adhesive-for-abs-pla-petg-hips-and-asa-copy?utm_source=copyToPasteBoard&utm_medium=product-links&utm_content=web

We still have 120ml bottles left!

All you need for sure adhesion of 3D prints!

Magigoo is an easy to use 3D printing adhesive designed to address the first layer not sticking problem.

Magigoo ensures a strong adhesion to the hot plate. But the magic starts when
printing is ready: just wait for the plate to cool down and then remove your prints
with just a finger flick!

In addition, Magigoo helps to prevent warping. Isn't it magic? Regardless of you being a hobbyist or professional - it is extremely rewarding to have a 30 hour print complete without any warping and having it release easily once cooled.

• Over 100 applications
• ABS, PLA, PETG, HIPS, ASA
• Easy application
• Easy release
• Easy clean
• No smell
• Non-toxic
• No additional tools needed
• Easy to transport
• Nicer print finish

Main Features 
- Easy application: applying Magigoo is as easy as child's play. Shake, press,
apply. Spread on an active printing area only. No need to cover the whole
surface
- Easy-release: Magigoo adhesive properties are designed to release the 3D
print once the build plate has cooled.
- Easy-clean: Magigoo is easily cleaned with water.
- Long-lasting: Magigoo last for 100+ average prints.
- Odorless and safe: Magigoo is safe to use - be it in a closed room or
educational workshop with kids.

Important note : The applicator has an active spring valve, which activates
when applicator is pressed against the build plate. Please do not press
the bottle as ketchup bottle, otherwise  the applicator may pop off.
Bottle may be slightly squeezed,  only when the nib is pressed against the
bed and it may be necessary only if bigger flow is required. Bottle must
not be squeezed when cap is off any other time as it may result in glue
popping out of the bottle.