![iSANMATE High-Speed PLA 3D Printer Filament Rainbow 03 [Fairy Floss] 1kg roll](http://www.formtech.co.nz/cdn/shop/files/High-speed-PLA-Rainbow-1-600x600_70x.jpg?v=1713148368)
![iSANMATE High-Speed PLA 3D Printer Filament Rainbow 02 [Cotton Candy] 1kg roll](http://www.formtech.co.nz/cdn/shop/files/High-speed-PLA-Rainbow-02-2-600x600_70x.jpg?v=1713147902)
Quality brands you can trust
Master composite materials with Fiberon™
Unleash Your Creativity With Panchroma™
Made in New Zealand
Class leading machines to inspire your creations
Want detail in your prints, try resin 3d printing for that fine detail.
Fillamentum PLA Extrafill is a premium material for FFF 3D printing. It is made from natural raw materials and biodegradable by industrial composting.
Features:
Downloads:
Tech Specs: https://drive.google.com/file/d/16nWfofBg8NAJmiAH4TzWvvf4W56hqiRb/view?usp=drive_link
| Flexfill TPU | Flexfill TPE | Flexfill PEBA | |
|---|---|---|---|
| Polymer base: | Polyurethane + ester | Polyolefin + SEBS | Polyamide + ether |
| Tensile strength: | 49 MPa | 5 MPa | 36 MPa |
| Elongation at break: | 600 % | 250 % | > 1000 % |
| Density: | 1.20 g/cm³ | 1.15 g/cm³ | 1.00 g/cm³ |
| Sensitivity to moisture: | High | Low | High |
| Chemical resistance: | Oils, greases, ozone | Water, acids, alcohols, alkalis | Car fluids, toluene, acetone, ozone |
| Food & skin contact: | Not recommended | Certificated | Not certificated |
| Gas permeability: | High | Low | Medium |
| Optical properties: | Glossy, transparent | Matte, non-translucent | Glossy, very transparent |
| For example, ideal for applications: | |||
| Vibration: | Anti-vibration, damping | Anti-vibration, damping | Vibration and energy transfer |
| Skin contact: | – | Long-term touch of human skin (holding in hands) | – |
| Under temperature: | +80–100 °C | +80 °C | -40 °C |
| In contact with: | oils | water | car fluids |
| Abrasion: | Sliding abrasion | – | Impingement abrasion |
| Other: | – | Outdoor | Low density |
| Other: | – | – | Rebounding |
Fillamentum PLA Extrafill is a premium material for FFF 3D printing. It is made from natural raw materials and biodegradable by industrial composting.
Features:
Downloads:
Tech Specs: https://drive.google.com/file/d/16nWfofBg8NAJmiAH4TzWvvf4W56hqiRb/view?usp=drive_link
| Flexfill TPU | Flexfill TPE | Flexfill PEBA | |
|---|---|---|---|
| Polymer base: | Polyurethane + ester | Polyolefin + SEBS | Polyamide + ether |
| Tensile strength: | 49 MPa | 5 MPa | 36 MPa |
| Elongation at break: | 600 % | 250 % | > 1000 % |
| Density: | 1.20 g/cm³ | 1.15 g/cm³ | 1.00 g/cm³ |
| Sensitivity to moisture: | High | Low | High |
| Chemical resistance: | Oils, greases, ozone | Water, acids, alcohols, alkalis | Car fluids, toluene, acetone, ozone |
| Food & skin contact: | Not recommended | Certificated | Not certificated |
| Gas permeability: | High | Low | Medium |
| Optical properties: | Glossy, transparent | Matte, non-translucent | Glossy, very transparent |
| For example, ideal for applications: | |||
| Vibration: | Anti-vibration, damping | Anti-vibration, damping | Vibration and energy transfer |
| Skin contact: | – | Long-term touch of human skin (holding in hands) | – |
| Under temperature: | +80–100 °C | +80 °C | -40 °C |
| In contact with: | oils | water | car fluids |
| Abrasion: | Sliding abrasion | – | Impingement abrasion |
| Other: | – | Outdoor | Low density |
| Other: | – | – | Rebounding |
!
![iSANMATE High-Speed PLA 3D Printer Filament Rainbow 01 [Lollipop] 1kg roll](http://www.formtech.co.nz/cdn/shop/files/High-speed-PLA-Rainbow-01-1-600x600_70x.jpg?v=1713147615)
