3D Printer HEPA Filtration System V1

Clean Air, Better Prints — Advanced 3D Printer Filtration System V1

Spare kits - 3D Printer Filtration V1 Filters here>

Compatible Connectors for 3D Printer Filtration System V1

Keep your workspace safe and odor-free with the 3D Printer Filtration System V1, engineered to capture harmful particles and fumes released during 3D printing. Featuring a triple-layer filtration stack and a high-efficiency centrifugal fan, this compact unit supports a wide range of filament types and is designed for both hobbyists and professionals.

It ships with a default connector for Bambu P1S/X1C and can be extended to H2S/H2D, P2S and other enclosed 3D printers with appropriate adapters. You can reach this article to check the V1 Compatible Connectors List, and some item of Creality, Elegoo, Prusa 3d printers are on the list.  

Key Features

🔹 Triple-Layer Filtration for Maximum Protection

• Pre-Filter: Traps large dust and debris, extending the life of downstream filters.

• HEPA H13 Filter: Captures ultrafine particles generated when printing PLA, PETG, ABS, ASA, and Nylon.

• Activated Carbon Bed: Adsorbs VOCs and chemical fumes such as styrene and caprolactam, helping keep air fresh and clean.

🔹 Optimized for 3D Printing Filaments

• PLA / PETG: Targets ultrafine particle emissions.

• ABS / ASA: Reduces styrene and other VOC fumes.

• Nylon: Mitigates caprolactam and related emissions.

🔹 Efficient Centrifugal Fan Design
Provides stable pressure and airflow through all filter stages, with air velocity up to 10 m/s at the outlets and volumetric airflow up to 60 m³/h, ensuring consistent purification without impacting print performance.

🔹 Compact & Easy to Use
Lightweight, space-saving design fits beside or inside printer enclosures. Quick-swap filter modules simplify maintenance and support long-term use.

🔹 Safe & Reliable
Improves workspace air quality and helps reduce contamination around the printer—supporting better, more consistent prints and extending component life.

V1 Compatibility Summary

Why Choose the 3D Printer Filtration System V1?

• Purpose-built for 3D printer emissions—not a generic air purifier.

• Triple-layer architecture addresses both particles and VOCs.

• Ideal for home, office, classroom, or workshop environments.

Testing Data, Not Vibes

Under comparable conditions (same printer, filament,), the curves show that with the filtration system on:
Particle and TVOC readings trend lower and more stable
After a post-print purge, the “door-open” odor spike is noticeably reduced

An MT15 air quality detector was placed inside each printer chamber to monitor particle levels (PM2.5/PM1.0) and VOCs. Additionally, another MT15 detector was positioned outside of each printer to measure particle levels (PM2.5/PM1.0) and VOCs inside the enclosure.

The same file was printed using PLA, PETG, ABS, and ASA filaments, with each print lasting 1–1.5 hours. Data was recorded every 5 minutes throughout the tests.

100mm Standard Ducting + Community Connector Library

Designed for Bambu Lab P1S/X1C, V1 uses standard 100mm inner-diameter tubing, making it compatible with most enclosed printers when a matching exhaust adapter is available. We curate downloadable connector files by printer model, including Bambu Lab 3D Printer H2S/H2D, P2S; Prusa enclosure; Creality 3D Printer, Flashforge 3D Printer... (database is continuously updated). Click this Compatible Connectors List for details.

Easy To Exchange the Filters

Recommended Stacking & Replacement

• > General use (PLA/PETG and mixed filaments)
  Stacking order: Pre-Filter → HEPA H13 → Activated Carbon
  Typical replacement cadence: printing ~8 hours/day → ~3 months per set (actual life varies with material, enclosure cleanliness, and fan speed). Replace sooner if you notice airflow drop, odor breakthrough, or visible discoloration.

 

• > VOC-heavy use (ABS/ASA focus)
  Alternative stacking for stronger odor control: HEPA H13 → Activated Carbon → Activated Carbon
  (Replace the pre-filter with a second carbon stage for increased styrene adsorption. If your enclosure is dusty, keep the pre-filter and shorten the carbon change interval.)

Note: Due to the housing design, the pre-filter uses a half-width outer foam. When using HEPA H13 as the first stage, trim off half of the outer foam gasket on the HEPA’s intake/outside-facing edge to ensure proper fit and airflow sealing. Trim foam only—do not cut into the filter media.

Stay Health with Less Odor

Print ABS/ASA in the print farm or in-house. Health is also vital for your life.