Resin Engineering LCD Series - Strong Resin 500g

Key features

• Flexural strength up to 120 MPa
  

• Stiff and durable
  

• Strong
  

• High dimensional accuracy and low shrinkage

• Almost odorless processing
  

• Compatible with all open-source SLA, DLP, and LCD 3D printers in the range of 385 - 405nm

Applications

• Jigs and fixtures

• Tooling

• Functional prototyping

• Manufacturing aids

• Short-run manufacturing
  

Comparison of technical specifications for FormFutura Engineering LCD Series 3D printing resin

Preparation(s) before starting to print

• Shake the bottle for at least 2 minutes before each use.

• After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin

• • The resin can be poured back from the vat into the bottle once your print is finished

• Always use protective measurements like safety glasses and nitrile gloves when handling resins.

Post-processing

• We do advise you to post-process your 3D print in order to achieve the material properties

• • Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5 minutes

• An ultrasonic cleaner is preferred/recommended

• • Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing

• Place the rinsed parts in a well-ventilated area for at least 30 minutes, or use pressurized air for at least 2 minutes

• • Cure your object in a high power curing chamber for approximately 20-30 minutes at 65° C

• The preferred curing wavelength is between 300-410nm

Safety

Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets.

• Always wear Respiratory Protection when sanding/cutting the resin object.

• Always use nitrile gloves when handling resins and uncured resin objects.