{"product_id":"formlabs-form-studio-wash-cure-2-in-1-wash-and-post-cure-station","title":"Formlabs Form Studio Wash+Cure - 2-in-1 Wash and Post-Cure Station","description":"\u003cp\u003e\u003cstrong\u003ePre orders are now on for the Formlabs Form Studio Wash+Cure due early first Q1 2027.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe Form Studio Wash+Cure washes and post-cures your SLA parts in one compact desktop unit. Drop in the wash bucket to clean parts with an agitated solvent bath, or swap it for the turntable to post-cure under 405 nm light. The machine switches modes automatically, and it’s sized to match the Form Studio 1 build volume.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eOverview\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eWhen an SLA print finishes, the parts are still coated in liquid resin. They need a thorough wash, then a post-cure to reach their full mechanical properties. The Form Studio Wash+Cure handles both steps in one footprint, so you don’t need two separate machines on the bench.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIn wash mode, a magnetically coupled impeller circulates solvent through a 10 L bucket for a consistent clean. In cure mode, a rotating turntable and 24 multi-directional 405 nm LEDs expose parts evenly from every angle. The machine detects whether the wash bucket or the turntable is fitted and switches modes on its own. You run everything with a single knob and a mode button.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eKey features\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo machines in one.\u003c\/strong\u003e Wash and post-cure in a single desktop unit, with automatic mode switching when you fit or remove the wash bucket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgitated solvent wash.\u003c\/strong\u003e A magnetically coupled impeller in a 10 L bucket gives a thorough, repeatable clean.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo wash speeds.\u003c\/strong\u003e Low speed for water and other solvents, high speed for IPA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWash on or off the platform.\u003c\/strong\u003e Hang the build platform straight over the basket, or wash loose parts in the basket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEven post-curing.\u003c\/strong\u003e A 24 cm rotating turntable and 24 multi-directional 405 nm LEDs behind frosted diffusers cure parts evenly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast cures for standard resins.\u003c\/strong\u003e Alpha Resins fully cure in 5 minutes. Engineering resins such as Tough 1500 cure in about 30 minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry in place.\u003c\/strong\u003e The wash basket hooks onto the bucket rim so parts can drain and dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in safety interlocks.\u003c\/strong\u003e The cure LEDs switch off when the cover opens, and wash cycles won’t start without the bucket fitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemoval reminders.\u003c\/strong\u003e The machine beeps every two minutes after a wash finishes, so parts don’t sit in solvent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuiet operation.\u003c\/strong\u003e It runs at no more than 60 dB(A).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow evaporation.\u003c\/strong\u003e A latching bucket lid and the closed cover reduce solvent loss.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eGood to know\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Form Studio Wash+Cure cures with light only and has no heater. Most standard resins cure fully without heat. However, some high-performance engineering resins, such as Rigid 10K, need extended curing at elevated temperature and require a Form Cure or Form Cure L. For engineering resins cured without heat, mechanical properties may not reach what a heated Form Cure delivers. This unit has not been designed or tested for biocompatible materials.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eTechnical specifications\u003c\/h3\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModes\u003c\/td\u003e\n\u003ctd\u003eWash, Cure (switches automatically with the wash bucket)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct dimensions (W × D × H)\u003c\/td\u003e\n\u003ctd\u003e33 × 30 × 44 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpace required for access\u003c\/td\u003e\n\u003ctd\u003e46 × 43 × 84 cm (cover lifts upward)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e9 kg (10.5 kg shipping)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e100–240 VAC, 50\/60 Hz, max 1 A; 24 VDC 60 W output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSound\u003c\/td\u003e\n\u003ctd\u003e≤ 60 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating environment\u003c\/td\u003e\n\u003ctd\u003e18–28 °C, 20–70% RH, indoor, well ventilated, \u0026lt; 2000 m altitude\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWashing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWash bucket volume\u003c\/td\u003e\n\u003ctd\u003e10 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax part size (W × D × H)\u003c\/td\u003e\n\u003ctd\u003e20.0 × 12.5 × 24.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAgitation\u003c\/td\u003e\n\u003ctd\u003eMagnetically coupled impeller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeeds\u003c\/td\u003e\n\u003ctd\u003eLow (water\/other solvents), High (IPA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible solvents\u003c\/td\u003e\n\u003ctd\u003eIPA, TPM, Formlabs Resin Washing Solution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePost-curing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTurntable diameter\u003c\/td\u003e\n\u003ctd\u003e24.0 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax part size (W × D × H)\u003c\/td\u003e\n\u003ctd\u003e20.0 × 12.5 × 22.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight source\u003c\/td\u003e\n\u003ctd\u003e24 multi-directional LEDs, 405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV LED power\u003c\/td\u003e\n\u003ctd\u003e48 W electrical, 27.8 W radiant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeating\u003c\/td\u003e\n\u003ctd\u003eNone (light-only cure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch3 dir=\"ltr\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eForm Studio Wash+Cure base unit\u003c\/li\u003e\n\u003cli\u003eWash bucket with impeller\u003c\/li\u003e\n\u003cli\u003eWash basket\u003c\/li\u003e\n\u003cli\u003eLatching wash bucket cover\u003c\/li\u003e\n\u003cli\u003ePost-cure turntable\u003c\/li\u003e\n\u003cli\u003eRinse bottle\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eRecommended accessories\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC Extractor:\u003c\/strong\u003e connects to the rear exhaust port and filters resin VOCs. It is also compatible with Form 4 printers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpare resin tanks and Build Platform Flex:\u003c\/strong\u003e for quick material changeovers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumables:\u003c\/strong\u003e IPA (90%+) or TPM, optical cleaning cloths, nitrile gloves and safety glasses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eSupport from Formtech\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eAs an authorised Formlabs reseller with showrooms in Auckland and Christchurch, Formtech provides local setup, training, warranty support and servicing for your Form Studio 1. Keep the original packaging, because Formlab's requires it for warranty service.\u003c\/p\u003e","brand":"Formlabs","offers":[{"title":"Default Title","offer_id":67686689243285,"sku":"FHS-WACU-01","price":578.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0329\/2561\/4216\/files\/Cure_34_Right_Speaker_A_00000__STORE.png?v=1791848975","url":"https:\/\/www.formtech.co.nz\/products\/formlabs-form-studio-wash-cure-2-in-1-wash-and-post-cure-station","provider":"Formtech Limited","version":"1.0","type":"link"}