{"product_id":"formlabs-form-studio-1-desktop-lfd™-resin-3d-printer","title":"Formlabs Form Studio 1 - Desktop LFD™ Resin 3D Printer","description":"\u003cp\u003e\u003cstrong\u003ePre orders are now on for the Formlabs Form Studio 1 — Desktop LFD™ Resin 3D Printer due early first Q1 2027.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Form Studio 1 is Formlabs’ compact desktop resin printer, built on the Low Force Display™ print engine. Expect fine 35-micron detail, light-touch support removal, automated resin handling and a 200 × 125 × 235 mm build volume, all in a printer that fits on a bench.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eOverview\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe Form Studio 1 brings Formlabs’ Low Force Display (LFD) technology into a compact desktop format. It cures each layer using 405 nm light through a masking display. A textured release surface reduces the forces on the part, the resin tank and the printer between layers. You get crisp detail and clean surfaces, and supports come off easily.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIt also takes care of the routine work for you. It heats the resin to its ideal temperature, dispenses resin from the cartridge automatically, checks that every consumable is fitted correctly before each print, and keeps you updated through the touchscreen, audio alerts, Dashboard and the Formlabs mobile app.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eKey features\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Force Display™ print engine.\u003c\/strong\u003e Masked stereolithography (MSLA) with a 35 µm pixel size and pre-tuned anti-aliasing for fine detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenerous desktop build volume.\u003c\/strong\u003e 200 × 125 × 235 mm, with layer heights from 25 to 300 microns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomated resin system.\u003c\/strong\u003e Cartridge-based dispensing with the LevelSense™ ultrasonic sensor keeps the tank at the right level throughout the print.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect resin heating.\u003c\/strong\u003e Heats resin to 25–45 °C depending on the material, for consistent results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight-touch supports.\u003c\/strong\u003e Supports are auto-generated in PreForm and come away cleanly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in camera.\u003c\/strong\u003e 1080p camera for remote monitoring, post-print photos and timelapses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible connectivity.\u003c\/strong\u003e Wi-Fi (2.4\/5 GHz), Ethernet and USB-C, with remote monitoring via Formlabs Dashboard and the Form mobile app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy part removal.\u003c\/strong\u003e Optional Build Platform Flex lets you pop parts off quickly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaner air option.\u003c\/strong\u003e Pair it with the VOC Extractor (sold separately). Together with Alpha Resins, the system meets UL Greenguard standards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple maintenance.\u003c\/strong\u003e It can print a cleaning sheet that gathers loose debris from the tank, and the LPU and backlight modules are customer-replaceable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eResin tank options\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm Studio 1 Resin Tank:\u003c\/strong\u003e optimised for Form Studio 1 General Purpose resins, for fast prints with great detail and surface finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm Studio 1 Resin Tank Pro:\u003c\/strong\u003e optimised for material compatibility. It prints all supported Formlabs resins, including the Tough family, and is required for Open Material Mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eBuild platform options\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm Studio Build Platform:\u003c\/strong\u003e durable matte aluminium surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm Studio Build Platform Flex:\u003c\/strong\u003e flexible surface for quick, easy part removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eTechnical specifications\u003c\/h3\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eMasked Stereolithography (MSLA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint engine\u003c\/td\u003e\n\u003ctd\u003eLow Force Display™ (LFD)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild volume (W × D × H)\u003c\/td\u003e\n\u003ctd\u003e200 × 125 × 235 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer thickness\u003c\/td\u003e\n\u003ctd\u003e25–300 microns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eXY resolution\u003c\/td\u003e\n\u003ctd\u003e35 µm pixel size with pre-tuned anti-aliasing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight source\u003c\/td\u003e\n\u003ctd\u003e405 nm, 6 mW\/cm² at the print plane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResin system\u003c\/td\u003e\n\u003ctd\u003eAutomated, single cartridge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResin heating\u003c\/td\u003e\n\u003ctd\u003eDirect, 25–45 °C (material dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupports\u003c\/td\u003e\n\u003ctd\u003eAuto-generated, light-touch removal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBiocompatible materials\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrinter dimensions (W × D × H)\u003c\/td\u003e\n\u003ctd\u003e34.2 × 31.5 × 50.2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpace required for access\u003c\/td\u003e\n\u003ctd\u003e36 × 33 × 79 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e14.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e100–240 VAC, 50\/60 Hz, 300 W, max 3 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eWi-Fi (802.11 a\/b\/g\/n\/ac\/ax, 2.4 \u0026amp; 5 GHz, WPA\/WPA2), Ethernet 100 Mbit, USB-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eInteractive touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlerts\u003c\/td\u003e\n\u003ctd\u003eTouchscreen, audio, SMS\/email via Dashboard, Form mobile app\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamera\u003c\/td\u003e\n\u003ctd\u003eIntegrated, 1920 × 1080 (2 MP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoftware\u003c\/td\u003e\n\u003ctd\u003ePreForm (STL, OBJ, 3MF and other CAD formats)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating environment\u003c\/td\u003e\n\u003ctd\u003e18–28 °C, low humidity, indoors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eAS\/NZS 62368.1:2022, IEC 62368-1:2023, IEC 62471:2006 (photobiological)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003eParts taller than 215 mm require the resin tank to be removed together with the build platform. When washing in the Form Studio Wash+Cure, remove prints taller than 200 mm from the platform first.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eForm Studio 1 printer\u003c\/li\u003e\n\u003cli\u003eResin tank\u003c\/li\u003e\n\u003cli\u003eBuild platform\u003c\/li\u003e\n\u003cli\u003ePower cable and USB-C to USB-A cable\u003c\/li\u003e\n\u003cli\u003eTool caddy with parallelism shims, LevelSense calibration tool, and 2 mm, 2.5 mm and 4 mm hex keys\u003c\/li\u003e\n\u003cli\u003eLevelling disc\u003c\/li\u003e\n\u003cli\u003ePlastic mixer\/tank scraper and metal scraper\u003c\/li\u003e\n\u003cli\u003eFlush cutters and sanding sticks\u003c\/li\u003e\n\u003cli\u003eCleaning sheet removal tool\u003c\/li\u003e\n\u003cli\u003eDrip tray\u003c\/li\u003e\n\u003cli\u003eCamera lens cap\u003c\/li\u003e\n\u003cli\u003eNitrile gloves\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eResin cartridges and extra tanks and platforms ship separately.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eRecommended accessories\u003c\/h3\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC Extractor:\u003c\/strong\u003e connects to the rear exhaust port and filters resin VOCs. It is also compatible with Form 4 printers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm Studio Wash+Cure, Form Wash and Form Cure:\u003c\/strong\u003e for washing and post-curing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpare resin tanks and Build Platform Flex:\u003c\/strong\u003e for quick material changeovers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumables:\u003c\/strong\u003e IPA (90%+) or TPM, optical cleaning cloths, nitrile gloves and safety glasses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eSupport from Formtech\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eAs an authorised Formlabs reseller with showrooms in Auckland and Christchurch, Formtech provides local setup, training, warranty support and servicing for your Form Studio 1. Keep the original packaging, because Formlab's requires it for warranty service.\u003c\/p\u003e","brand":"Formlabs","offers":[{"title":"Basic package - Non Flex Build plate","offer_id":67702079291541,"sku":"FST1-BASIC-NUS","price":2024.0,"currency_code":"NZD","in_stock":true},{"title":"Flex Package - Flex Build plate","offer_id":67702079324309,"sku":"FST1-FLEX-NUS","price":2181.83,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0329\/2561\/4216\/files\/Optimized_For_Web_PNG-34_Right_Colossus_A_00000.png?v=1791843905","url":"https:\/\/www.formtech.co.nz\/products\/formlabs-form-studio-1-desktop-lfd%e2%84%a2-resin-3d-printer","provider":"Formtech Limited","version":"1.0","type":"link"}